VIDEO

Our worker welds the lamps in the auto exhausting gas machine one by one. Then use the checking equipment to check the welding job is okay or not. We must keep good quality for all the lamps were welded in the auto machine.

Tepro(China)Co.,LTD designed the auto exhausting gas machines. It is one-button start machine. All the programs have been setting in the control system. The worker press the button after install the lamps in the machine only. Then the auto exhausting gas machine will finish the job by itself. All the useless gases have been exhausted in the end. Our lamps have the stable quality at any time.

Tepro(China)Co.,LTD designed the auto-production filament machine. It is 98 percent of pass. The worker only put the raw machine in the machine then the machine will make the filament by itself. It is very efficient machine. The machine produces the quantity of filaments one day which are enough for the workshop to make 3000pcs of the lamps.

We designed the welding machine to weld the small tube in the UVC lamp. The protective gas will be filled in the lamp when we clamp the filament with the quartz sleeve. Because the melting point of quartz sleeve is higher than filament. So we use the protective gas to protect the filament.

Tepro(China)Co.,LTD is professional manufacturer which makes the ultraviolet bulb. We spend a lot of time and money to train our staff. We keep to improve the skill for them. Because each ultraviolet bulb was made by them. They are the key point for the quality of the bulb.

Each germicidal lamp was tested by 2 steps (100%) in the processing. Our warehouse guys who tests the raw materials and QC tests the germicidal lamp in our testing room every day. The QC gives the reports to manufacture manager then the manager to solve the problem if we have it. So the testing job keeps good quality for our germicidal lamps.

TEPRO builds up a new office for the foreign trade team. The office is located in the downtown and close the home of the staff. Our staff discuss the business with the clients in the new office then show them the details of our factory. The clients are happy to do the business with us. Because we are focus the quality and efficiency for our germicidal lamps.

We print our logo or client’s logo in the bulb before shipment. We put the bulb in the gift box then put the gift box in the carton box then put the carton box in the wooden box. So the packaging will keep the bulb isn’t broken easily. Our warehouse staff check the quantity of the bulb which are correct with the PO. Then send the goods to client by DHL, FedEx , TNT and so on.

The cutting machine cuts the quartz sleeve to different length then weld the small glass tube on the quartz sleeve for H series germicidal lamps. Tepro(china)Co.,LTD develops the machine and improve it in productive process.

We are training our workers when he/she do the new step for the job. The clamping machine has 2 times to burn the quartz sleeve. So it is good quality for the filament is clamped with the quartz sleeve together. Our clamping machine has the automatic blanking mechanism. It is convenience for the worker’s job.

There are lots of model for the ultraviolet lamps. We would like to sort by lamp base. The first is G23 base, the second is 2G11 base, the third is G23Q base, the fourth is G5 aluminum base, the fifth is G5 ceramic base, the sixth is ceramic 4 pins base, the seventh is ceramic 1 pin base, the eighth is ceramic 4pins base but the lamp is amalgam lamp. The ninth is ceramic 4pins base but for the U shape lamps. The client choose different kind of base for their equipment. Our ultraviolet lamps are the same function which to kill the bacterial and virus in the air and water. So there are 2 wavelength for client to choose 185nm (ozone) and 254nm (ozone free).

All the parts are put in the carton box. The first parts are the plastic holder. They fixes the stainless steel housing in the wall. The second parts are the O-ring which tighten the quartz sleeve with the stainless steel housing. The third part is the ballast to switch on the UV lamp. We can supply different kind of the plugs for the clients. Such as US standard plug, European standard plug and so on. The fourth part is stainless steel housing, the thread can be customized by client. The fifth is the quartz sleeve which separate the water and the UV lamp. To protect the function of the UV lamps. The sixth is the UV lamp which kill the bacteria in the water. You can know how to assemble the water purifier in this video.

There are many bacteria in the air of our home. The sunshine can’t go to everywhere. So we can use the air sterilizing lamp to replace the sunshine. And the ultraviolet intensity of air sterilizing lamp is 8 times than the sun. The first step open the box and take of the EVA cover. The second step take off the packaging bag and see the beautiful air sterilizing lamps. It is 36W and the lamp can be used about 8000h.The remote control to setting the time for the lamps. There are 30min, 40min, 60min and 90min for choose. Supply the 110V and 220V power supply. Pay attention: the human, animal and the plants such be left the room when switch on the air sterilizing lamp.

The irradiance of UVC Lamp is the major parameter for the quality of the lamp. TEPRO have the testing room to do the job. The first step puts the lamp in the tank but need to pay attention. The glass is easy broken. The second step connects the wire with the lamp and switch on the button. The lamp will be switch on after 5-10 seconds. Prohibit to see the lamp more than 5 seconds, the irradiance will hurt your eye if long time. Close the door and go to the computer to read the data of irradiance. Then print the report to our client.

Install the water purifier in the area which to sterilize the water. The first step switch on the power button then the LED indicator light which in the control box is switched on. The second step to check the UVC lamps are opened or not. The ballasts have the LED indicator light to show the UVC lamps are working. Green means the lamps is okay. The red means the lamp has the problem. The voltage meter and the timer are installed on the control box. They show the condition of the lamps to client.

The diving germicidal lamp is easy to using and cheaper than the stainless steel water purifier. The lifetime of the diving germicidal lamp about 8000h. Our client use this kind of lamp for the fishpond. Our diving germicidal lamp inhibits the number of microorganisms and be put in the water 100%. Suggest client put the diving germicidal lamp close the pump then the water be sterilized before come into the fishpond. Take the lamp from the carton then install the plastic part in the quartz sleeve. The plastic part protect the quartz sleeve is broken when the lamp touch the hard object. Connect the plug to the power supply then check the lamp is switched on or not. Check the Cube of the fishpond then calculate how many diving germicidal lamps should be used.

Use the electric spark detector to check the germicidal lamp. Blue color is good, Pink isn’t okay and without color is broken. So only blue color the qualified product.