Product Information
Ballast is a necessary electrical component of discharge luminescent device. It can generate instantaneous high voltage when the starter is disconnected, so that the luminescent device starts to emit light, and then limit the current to control within the rated range of the luminescent device.
Energy saving
The lamp's electronic ballast mainly USES the frequency of 20 ~ 60kHz to supply the lamp, which makes the light efficiency of the lamp increase by about 10% compared with the power frequency (according to the length of the lamp is 4 feet), and its own power consumption is low, so that the total input power of the lamp decreases by about 20%, which has better energy saving effect.
2. More stable luminescence
It is beneficial to improve visual resolution and efficiency.Reduce the visual fatigue of continuous operation, which is beneficial to protect eyesight.
3. A more reliable starting point
Preheat the lamp tube after a successful starting point, avoid multiple starting points.
4. High power factor
The power factor of fluorescent lamp that accords with national standard above 25W is higher than 0.95.However, it should be noted that the national standard sets a very high harmonic limit for lamps below 25W, so that its power factor drops to 0.7~0.8.
5. Stable input power and output luminous flux
High quality products have good voltage stability performance, when the power source, voltage deviation is large, still can maintain the constant power of the light source, stable illumination, is conducive to energy saving.
6. Extend lamp life
The constant power of high quality products and the drop of tube current, as well as the reliable starting point can prolong the life of the lamp.
Product Parameters
Type | Size | Input Voltage | Lamp Power | Lamp Specification |
RW3-425-18A | 75*48*39mm | 110-120V±10% | 10-17W | UVC11W-UVC16W |
RW5-425-40 | 105*60*31mm | 220-240V±10% | 10-40W | GPH212-843T5 UVC36T5 |
RW5-425-40A | 105*60*31mm | 110-120V±10% | 10-40W | GPH212-843T5 UVC11W-UVC16W |
RW12-180-10 | 81.5*42*23.5mm | 220-240V±10% | 4-8W | UVC4W UVC6W UVC8W |
RW12-180-10A | 81.5*42*23.5mm | 110-120V±10% | 4-8W | UVC4W UVC6W UVC8W |
RW12-425-18 | 81.5*42*23.5mm | 220-240V±10% | 10-17W | GPH287-357T5 |
RW12-425-18A | 81.5*42*23.5mm | 110-120V±10% | 10-17W | GPH287-357T5 UVC16W |
RW15-425-18 | 81.5*42*23.5mm | 220-240V±10% | 10-17W | GPH212-357T5 UVC11W-UVC16W |
RH9-2100-320 | 250*108*57mm | 220-270V±10% | 200-320W | GPHHA1000T6L GPHHA1554T6L |
RL1-425-90 | 215*44*26mm | 220-240V±10% | 40-79W | GPH1148-1630T5 G48T5 G64T5 |
RL1-800-100 | 215*44*26mm | 220-240V±10% | 55-95W | GPH436-893T5HO GHO36T5 UVC75WHO |
RL11-425-40 | 165*38*26mm | 220-270V±10% | 21-40W | G36T5 GPH212-843T5L UVC40W |
TN51-425-40L | 200*80*57mm | 220-270V±10% | 10-40W | GPH212-843T5L UVC11W-UVC40W |
TN51-800-95L | 200*80*57mm | 220-270V±10% | 48-95W | GPH436-1063T5HO CUH60WHO |
TN2-800-2/75U | 220*70*30mm | 110-240V±10% | 75-155W | GHO36T5L |
Product Display
BSP-H fluorescent lighting electronic ballast 40w
Specification: 198~264VAc50/60Hz T5_1x14W,1x28W,1x35W,2x14W,2x28W,2x35W
Certificate: TUV/CE, EMC/CE, DIN, Conform to RoHS & Eup
electronic ballast for fluorescent lamp
Advantage:
(1) Preheating Start, Enlarge the lifetime of fluorescent lamp
(2) Wide application Range, 198~264VAc/-15~50°C work stably
(3) High efficiency & Power Factor, EEI=A2 μ=0.95 PF=0.98
(4) Perfect Protective Function, EOF
(5) Life, 50000h
Technical Specifications
Line Voltage: 230V AC
AC Source: 198~264VAc
Input Frequency: 50/60Hz
Operating Frequency: 28-50KHz
Max. Output Voltage: 600VRMS
Efficiency: ≥90%
Starting: Instant
Ambient Temjperature: -20~40
Max.Case Temp: 70
Protection Degree: IP64
Approval:CE
Suitable for T8-- 1x10/ 1x15/ 1X20/1X30/1X40W
2X10/2X15/2X30/2X40W
PL 18W/24W/36W/55W
2X18/2X24/2X36/2X55W
Wiring:
Wire stripping head, 5~9mm
Wire diameter, Φ0.5~1.5mm
CIRCUIT DIAGRAM
Copyright © 2019 Introduction Of Tepro ( China)co., Ltd. | All Rights Reserved 粤ICP备12009768号【版权所有:佛山市腾诺科技有限公司】