Tepro  >  AI - Page Sitemap  >  Tepro bactericidal uv light sterilizer customized for pools
Tepro bactericidal uv light sterilizer customized for pools

Tepro bactericidal uv light sterilizer customized for pools
  • Tepro bactericidal uv light sterilizer customized for pools
  • Tepro bactericidal uv light sterilizer customized for pools

Tepro bactericidal uv light sterilizer customized for pools

Tepro uv light sterilizer is designed by optical specialists. Their knowledge in the design of complex, high-resolution, diffraction-limited, innovative optical assemblies makes the product have the best quality. It features leather aroma rather than the gross chemical smell
Inquire Online
Get the latest price
Quantity Needed:
Pieces
E-mail:

Product Information




RL11-425-40 220V/110V Without The Plug

Technical Specifications  

       Mains Voltage:110-240VAC±10%

       Mains Frequency:50/60Hz

       Power Factor: >0.98

       Efficiency: >92%

       Operating Frequency: 40-60KHz

       Dimensions: 200*64*29mm

  Installation Requirement

       Wire Gauge:0.5-1.0mm2

       Max.cable length between ballasts and lamp:5m

       LED specification:      VF=1.8-3.6V  IF =5-20mA(When it's necessary,series current limiting resistor is needed.)

       Relay specification:     Mains Voltage 5VDC±10% Mains Current 45mA±10%;

                        Max.start Voltage ≤3.75VDC Coil Resistance≥100Ω

  Mounting Restrictions 

       Disconnect Input Power Before Installing or Servicing.

       Ballast Case Must Be Grounded.

       Don’t short any two wires of the four outputs.

  Features

Starting:Preheat

Lamp status indication via DC signal output(Connected LED Requirement).

       DC 5V±5% (5mA):lamp on.

       DC 0V:lamp fault or on lamp.

  Applications

All areas of applications include UV lamps.

=>Air purification

=>Industrial water treatment

=>Kitchen purification

Tepro bactericidal uv light sterilizer customized for pools-1


Product Parameters




Type

Size

  Input Voltage  

  Lamp Power  

  Lamp Specification  

RW3-425-18A

 75*48*39mm 

110-120V±10%

10-17W

UVC11W-UVC16W

RW5-425-40

 105*60*31mm 

220-240V±10%

10-40W

GPH212-843T5
G36T5 

UVC36T5
CUH36W

RW5-425-40A

 105*60*31mm 

110-120V±10%

10-40W

GPH212-843T5 

UVC11W-UVC16W

RW12-180-10

  81.5*42*23.5mm  

 220-240V±10% 

4-8W

UVC4W 

UVC6W 

UVC8W

   RW12-180-10A   

81.5*42*23.5mm

110-120V±10%

4-8W

UVC4W 

UVC6W 

UVC8W

RW12-425-18

81.5*42*23.5mm

220-240V±10%

10-17W

GPH287-357T5

RW12-425-18A

81.5*42*23.5mm

110-120V±10%

10-17W

GPH287-357T5 

UVC16W

RW15-425-18

81.5*42*23.5mm

220-240V±10%

10-17W

GPH212-357T5 

UVC11W-UVC16W

RH9-2100-320

250*108*57mm

220-270V±10%

200-320W

GPHHA1000T6L 

GPHHA1554T6L

RL1-425-90

215*44*26mm

220-240V±10%

40-79W

GPH1148-1630T5 

G48T5 G64T5
G67T5 UVC64T5

RL1-800-100

215*44*26mm

220-240V±10%

55-95W

GPH436-893T5HO 

GHO36T5 

UVC75WHO

RL11-425-40

165*38*26mm

220-270V±10%

21-40W

G36T5 

GPH212-843T5L 

UVC40W

TN51-425-40L

200*80*57mm

220-270V±10%

10-40W

GPH212-843T5L 

UVC11W-UVC40W

TN51-800-95L

200*80*57mm

220-270V±10%

48-95W

GPH436-1063T5HO
CUH35WHO 

CUH60WHO
CUH95WHO

TN2-800-2/75U

220*70*30mm

110-240V±10%

75-155W

GHO36T5L
GPH436/846T5HO
TUV PL-L35/60WHO
TUV36T5HO
GHO64T5L
GPH1554T5HO
TUV PL-L95WHO
TUV64T5HO




Product Display



Through a series of tests, the quality of Tepro uva uvb light bulbs is guaranteed. These tests include color shading tests, symmetry checks, buckle checks, and zip tests. It is odor resistant due to the good breathability and hygroscopicity of the leather
The aim of carefully control the quality of Tepro uva uvb light bulbs is to achieve the highest international standards and regulations for bedding within the specified tolerances. Its surface features the unique warm touch and texture of the natural leather
Tepro uv light sterilizer has been certified according to some key certificates. These certificates mainly include national compulsory product certification (CCC), IEC electrical safety standards, etc. Its surface features the unique warm touch and texture of the natural leather
The production of Tepro uv light sterilizer mainly involves the following stages, including control system design, fabrication, welding, spraying, commissioning, and assembly. The product features high resistance to puncture
Tepro uv light sterilizer has passed many lens and optical tests, including light transmittance, UV transmittance, blue light transmittance, and anti-reflective light reflectance. It is not easy to crack, peel or fade
The product is notable for its strong wear resistance. Its structure, built with heavy-metals, mainly alloy and steel, can withstand daily industrial heavy use. With a stable structure, it protects the object insides against shock
Product Message
Chat Online 编辑模式下无法使用
Chat Online inputting...