How to correctly choose and use ultraviolet sterilization lamp

by:Tepro     2020-04-25
After decades of development, the uv light sterilizer technology already quite mature. In domestic water, medical water, industrial water, food production water treatment field uv sterilizer can be seen everywhere. For a lot of people know something about the effect of uv sterilizer, but should learn how to use and maintenance is not much. lamp selection need to note: 1, the design of the sterilizer should comply with the GB 8988 'grid power supply for household and similar general purpose electronic and security requirements of related equipment requirements; 2, uv sterilizer under uv irradiation side should need ahead of time polishing processing; 3, ultraviolet radiation sterilization lamp should be stipulated in the technology management program approved drawings and technical documents; 4, for the same type or the same type of sterilizer parts shall guarantee that the interchangeability, lest cause unnecessary consequences; The case 5, barrel or need to set up the guide plate; The top 6, sterilizer should have in and out of the sampling pipe, drain pipe, tube. In the sterilizer inconvenience when lowered drain pipe, also can be in in with sterilizer connection piping installation; 7, sterilizer should be equipped with indicating lamp lighting, lighting the accumulative time indicates the relative instructions or uv irradiation intensity; 8, working pressure of the pressure cylinder should not be less than zero. 60 mpa, test pressure shall not be less than zero. 90MPa; 9, straight tube quartz uv low pressure mercury lamp and lamp installation requirements shall comply with YY/T0160 the straight pipe form the low-pressure mercury quartz ultraviolet ray sterilizing lamp '; 10, quartz glass tube and the water separated from the tubes, 253. 7 mm uv transmittance should be greater than 85%, low voltage apparatus sterilizer is chosen in accordance with the relevant product technical requirements; 11, the layout of ultraviolet germicidal uv lamp should be made by the ultraviolet light uv intensity distribution on the surface of the uniform; 12, when have higher requirements to the environment, should give priority to choose low ozone tube, in order to reduce ozone pollution to the environment. As one of the most commonly used sterilization equipment, ultraviolet germicidal uv lamp has been more and more widely applied. Due to the factors influencing the effect of ultraviolet disinfection sterilizer is more, so must be more careful in the selection and use. More than 12 about uv sterilizer choose need attention were collected from the working experience and network, such as have not all welcome to communicate with us.
In the present growing world of emerging technology, the has demanding operation in various sectors like uv disinfection lamp, uv sterilization lamp, uv disinfection lamp and many other industries at uv sterilization lamp levels of manufacturing and designing.
If you're interested in buying a of high quality and affordable price, let Tepro (China) Co., Ltd. at Tepro UV Lamps be your guide to the best shopping experience.
There's the area of manufacturing uv disinfection lamp that's becoming very important. If you can create those things, you build this closed bond.
Tepro (China) Co., Ltd. knew if this worked for us, it would work for others, so we took the exclusive product and program and re-developed it to be more accessible to customers.
These uv disinfection lamp uv air filter have made the life easier. The best feature of the is its uv sterilization lamp.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...